Specifications
Available in 12 or 24-volt versions, the Prosine 2.5 inverter / charger
provides up to 2500 watts of true sine wave output and combines this
with a 100-amp, continuous-duty multistage battery charger. Prosine 2.5
provides clean, regulated, output and offers distinct advantages over
other wave forms. Prosine 2.5 incorporates automatic overload, short
circuit, low-voltage, over-temperature and AC back feed protection
circuitry. It has power factor corrected charging which reduces the
amount of current required to recharge the battery. A standard LED
control panel and battery temperature sensor is included with Prosine
2.5. Offering a revolutionary power to weight ratio, Prosine technology
has become a benchmark for premium integrated power systems.
ProSine 2.5 Features
2500
watt Output with 4000 watt Surge
Prosine 2.5 uses DC power from a battery to provide up to 2500 watts of
continuous true sine wave AC power with a 4000-watt surge to start
demanding and sensitive loads. Designed to replicate the electrical
output produced by utility companies, true sine wave is the only
electrical wave form that can power high-end electronic equipment such
as laser printers, sound systems, and plasma screen televisions. Motors
and battery chargers will run better and cooler on true sine wave
inverters.
Power
Factor Corrected Multistage Charger
Prosine 2.5's 100-amp multistage charger keeps batteries in top
condition when they are not in use. This maximizes the life and
performance of the batteries. Prosine 2.5 comes with a preprogrammed
charge cycle for gel or lead acid batteries. Prosine 2.5 regulates the
voltage and current delivered to the battery without overcharging.
Manual equalization allows you to recondition lead acid batteries when
necessary.
Prosine
2.5's power factor corrected charge feature doesn't draw excessive power
or trip breakers in order to provide a 100-amp charge. A 100-amp charge
is maintained even with input voltage as low as 100V. Power factor
correction makes charging more efficient since it uses less AC input
current to create DC output current.
When
recharging batteries, Prosine 2.5 will reduce its current draw when AC
loads are operating to keep within the limits of the AC input breaker
rating. Batteries can be recharged when AC equipment is operating since
remaining current is available to recharge batteries.
Built
in Transfer Switch
An integrated 30-amp transfer relay provides seamless transition from
shore to inverter power. When utility AC power fails or is disconnected
from the unit, a quick 20-millisecond transfer takes place and Prosine
2.5 begins delivering AC power to loads on the system. When utility AC
becomes present again, the control circuit waits 8 seconds and Prosine
2.5 verifies the stability of the AC source. Prosine 2.5 synchronizes
the inverter to the AC source for a smooth, seamless transfer back to
utility power. The microprocessor inside Prosine ensures that the
inverter is synchronized with the line to provide a smooth transfer if
utility power fails.
Standard LED Control Panel and Temperature Sensor Included
The Standard LED Control Panel is used to report information about
Prosine operating parameters and the inverter / charger's external AC
and DC power sources. The standard control panel has five separate
functions: the Battery Status LED display, the Faults Display and Reset
Button, the Inverter Status Indicator and On/Off Control Button, the
Shorepower Indicator, and the Charger Status Dipslay and On/Off Control.
Use the Temperature Sensor to adjust the charge formula in real time
according to actual battery temperature to ensure that batteries are
fully charged even when temperature fluctuates.
Compact, Lightweight and Easy to Install
High frequency switching technology results in a lighter weight and
compact design making installation into tighter spaces possible. Prosine
2.5's actual weight is 32 lbs. (14.5 kg).
Options
- 12 volt
- 24 volt
Accessories (included)
- Standard LED Control Panel
- Battery Temperature Sensor